Block Paving Re-Sanding After Pressure Washing in Olton
Block paving re-sanding after pressure washing in Olton, B92, is the closing stage of a block paving driveway jet wash rather than a treatment you book on its own. Once the jets have driven moss, weed roots and compacted silt out, those joints sit empty, so we work kiln-dried or premium jointing sand back down between the pavers.
What Re-Sanding Covers on Olton Block Paving
Block paving re-sanding in Olton, B92, is the closing stage of a block paving driveway jet wash rather than a treatment booked on its own. Once the jets have driven moss, weed roots and compacted silt out of the joints, those gaps sit empty, and kiln-dried or premium jointing sand has to be worked back down between the pavers. It suits Olton homeowners whose drive has just been cleaned, or whose joints have visibly emptied. Where the wider driveway service decides how a surface is cleaned, and the block paving jet wash concentrates on clearing the joints, this narrower step is only about refilling them properly. Sunken or loose blocks are pointed out to you first, because sand alone will not correct them.
Refill Your Olton Block Paving Joints
Tell us your Olton address, the rough size of the drive and how the joints look. We can usually measure remotely and talk through what re-sanding will and won't do for your paving.
Survey form is not configured. Please provide a valid survey ID.
Honest Limits and Joints Filled Properly
Filled joints are what let block paving behave as one interlocking surface rather than loose pieces. With the sand replaced, the pavers lock back together and sit level underfoot, and the weed roots and silt that were quietly pushing them apart are no longer doing...
Why Pressure Washing Birmingham stand out?
What Changes the Cost of Re-Sanding
Jointing sand is quoted separately from the clean, at our trade pricing, so you can see what it costs and decide whether to include it. The main variable is the measured area, since a drive of roughly 30 m² takes far less sand than one nearer 600 m², and many Olton drives sit closer to the smaller end. Joint width and depth matter too, as deeply washed-out joints take more material. To quote accurately we need the address, the approximate size, and a sense of the condition of the joints. Digital mapping usually lets us measure remotely and give you a figure over the phone in about ten minutes. Call today for your free quote.
Gareth Pemberton
Olton Resident
“The drive had been washed by someone else and they simply left the joints open. Half the sand had gone the first time it rained. This team came over the top of it and brushed kiln-dried sand right down into the gaps properly, not just a scatter across the surface. It feels like one solid drive again rather than a load of separate bricks.”
Refill Your Olton Block Paving Joints
Tell us your Olton address, the rough size of the drive and how the joints look. We can usually measure remotely and talk through what re-sanding will and won't do for your paving.